I fix my car a lot, the most difficult thing I did was rear wheel bearings on a Subaru legacy.
That was not easy
However doing front wheel bearings on a Mercedes was easy
You're right these skills are being completely lost from the average person especially younger people
Need to replace ball joints and tie rods soon
My 280zx is in a billion pieces rn
My 280zx is in a billion pieces rn
Not trying to roast but at the same time I lowkey am but
Hasn't been in a billion pieces for years?
Me and my brother are deciding on what vehicle we should mod
Not trying to roast but at the same time I lowkey am but
Hasn't been in a billion pieces for years?
Me and my brother are deciding on what vehicle we should mod
Nah, Im just waiting to come up with $600 to get my gas tank reconditioned since Im tired of f***ing with it. It runs, so I'm at the point of just working on cosmetic things so the interior bits are all out of the car.
This old man that's the landlord's husband can fix anything
Man just replaced the whole kitchen floor
Man ripped out the sink, removed old piping and repaired the wall, then installed new sink
Man replaced entire replaced bathtub plumbing
Crazy part is he is an electrician by trade
My old landlord got the cheapest contractor possible to fix the piping to the upstairs showers
They didn't use the proper grade of glue/piping and the pipes fell apart
Believe it or not home plumbing is quite easy. The most important part is just getting your proper grade so it’ll flow properly.
I feel like these skills are getting lost a little bit because my generation really doesn’t care about knowing that stuff or doesn’t care for just f***ing around. I love to f*** around. For example I f***ed around and built my drill brush. Probably could have bought one but it was fun to make just took some thinking
eh not quite
When doing plumbing you have to really measure everything 2-3x before committing to make sure it'll fit/work correctly. It's really time consuming and you have to have access to certain tools. I wouldn't trust myself to do plumbing or major electrical work. Trying to get into networking after college so I'll probably learn cabling at some point.
I fix all my own stuff but I probably won't do plumbing beyond the basics. I did all the work on my previous car by following YouTube.
It aint a females job when you cant get any to come over.
Oh yeah? Why did your mom come over last night
😂🤣😭😹💪🖕🙏
Oh yeah? Why did your mom come over last night
😂🤣😭😹💪🖕🙏
my mom has self respect and wouldn't dabble with a man below 6'
Not trying to roast but at the same time I lowkey am but
Hasn't been in a billion pieces for years?
Me and my brother are deciding on what vehicle we should mod
dude
Mod an S10 if you're looking for something cheap with cheap parts.
OG9-3 Saab's are a good call as well, parts are dirt cheap and they don't have the same electrical issues that were rampant in the NG9-3.
Ecotecs are stupid underrated if you're looking for a cheap 4cyl to turbo. There are some wild Saturn's and cobalts out there. If you get an SL2 or SL1 they are stupid light.
my mom has self respect and wouldn't dabble with a man below 6'
Arent you barely 6"
dude
Mod an S10 if you're looking for something cheap with cheap parts.
OG9-3 Saab's are a good call as well, parts are dirt cheap and they don't have the same electrical issues that were rampant in the NG9-3.
Ecotecs are stupid underrated if you're looking for a cheap 4cyl to turbo. There are some wild Saturn's and cobalts out there. If you get an SL2 or SL1 they are stupid light.
You sold your car and aren't allowed into car talk
You sold your car and aren't allowed into car talk
I'm just not at the point in my life where having a project car is sensible
So f***ing glad I sold it when I did. Nobody is buying cars rn.
Im above the height requirment to ride your mum
I'm 6"9 255 with 3.46% body fat percentage so u can f*** off buddy
Thanks op bout to take this to shark tank and become trillionaire
I'm just not at the point in my life where having a project car is sensible
So f***ing glad I sold it when I did. Nobody is buying cars rn.
I read somewhere where 7 million Americans are 90 days behind on their car payments
I read somewhere where 7 million Americans are 90 days behind on their car payments
I believe it. New cars are insanely expensive, and dealerships try to make them seem cheap by making the loan 10000 months.
I paid cash for my car, but I was tired of a chunk of my monthly budget always going towards it.
I believe it. New cars are insanely expensive, and dealerships try to make them seem cheap by making the loan 10000 months.
I paid cash for my car, but I was tired of a chunk of my monthly budget always going towards it.
My car will be paid off in November and by then the only debt I'll have is my house.
My car will be paid off in November and by then the only debt I'll have is my house.
I have student loans
Gotta graduate before paying em back though
eh not quite
When doing plumbing you have to really measure everything 2-3x before committing to make sure it'll fit/work correctly. It's really time consuming and you have to have access to certain tools. I wouldn't trust myself to do plumbing or major electrical work. Trying to get into networking after college so I'll probably learn cabling at some point.
I fix all my own stuff but I probably won't do plumbing beyond the basics. I did all the work on my previous car by following YouTube.
From experience I can say it’s pretty easy if you have an idea of what you’re doing, what you’re using and why you’re doing it. Not saying I could engineer a system but basic home owner plumbing isn’t too difficult at all
Another chemical useful for combating rust is phosphoric acid, it's a rust converter however the shipyard does not use it at all for some reason
Sounds like u be dissolving people in hydroflouric acid
dude
Mod an S10 if you're looking for something cheap with cheap parts.
OG9-3 Saab's are a good call as well, parts are dirt cheap and they don't have the same electrical issues that were rampant in the NG9-3.
Ecotecs are stupid underrated if you're looking for a cheap 4cyl to turbo. There are some wild Saturn's and cobalts out there. If you get an SL2 or SL1 they are stupid light.
I already have a ZX2 which is extremely light weight
We are debating on getting a mustang gt, wrx, or a e46 330i